38
CARE AND CLEANING
WARNING:
Wear appropriate gloves when working with hot liquids. Be
careful not to burn yourself on the blender jug, scald spouted or overflowing liquids
or steam.
ATTENTION:
Never use hard or sharp-edged objects, caustic cleaning pro-
ducts (disinfectants), scouring aids (scourer), or abrasives to clean the appliance
or the any accessories. Do not apply any violence when cleaning the knife insert
so as not to bend the blades and not to damage the mounting. Never clean the
appliance or any components of it in the dishwasher.
CLEANING THE BLENDER JUG
WARNING:
The blades of the knife insert are sharp. Treat the blades care-
fully and without violence, so as not to cut you and not to damage the blades.
1. Empty the blender jug completely and rinse loosely adhering food with clean
water.
2. Then fill hot detergent solution into the blender jug. The blades should be cove-
red with the solution. Seal the jug with the lid, turn the appliance on (switch
position: ›1‹) and let it work for a few seconds.
3. Switch the appliance off (ON/OFF-switch position ›0‹ (AUS/OFF). Wait until the
blades have come to a stop, and remove the blender jug from the motor base.
4. Unplug the power plug from the outlet.
5. Remove the lid from the blender jar and pour out the detergent solution. Remove
residue on the walls of the blender jar. You can easily remove clinging residue
with a plastic cleaning.
WARNING:
Use extreme caution when working in the area of the blades; be
careful not to cut on the sharp blades and not to damage the blades.
Important:
In most cases, the blender jug will already be hygienically clean.
However, should food residues still are adhering to the knives, then disassemble
the bottom of the jug and clean the components individually.
6. Rinse the lid and the beaker in warm detergent solution.
7. Rinse the blender jug, the lid and the beaker afterwards with clean water, dry
the parts with a dish towel gently and let it dry out of the reach of small children
at the air.
