•
Never
push the food into the feeding funnel with your fingers. Always use the feedstick
for this purpose! The mincer can not mince hard or stingily ingredients (for example: bones,
nuts, ginger). If you use hard ingredients like onions or carrots, you have to steam them before
adding them to the meet otherwise they can block the motor. If the motor is blocked turn OFF
the appliance immediately and operate according to the instructions ´Trouble shooting`.
•
Before the mincer is used for the first time, all parts – with the exception of the motor block
– must be thoroughly cleaned in warm soapy water.
•
To ensure that the mincer does not seize, never operate it under excessive pressure.
•
Instantly switch off the mincer if the worm or knife get blocked by a hard object and
wait for approx. 6 seconds to be certain that the motor is no longer running. Switch ON
the mincer after it has been cleaned.
•
Never
use force operating the appliance to avoid damage of the units of the appliance.
•
Never
hold your face or other body parts over the feed funnel when the motor is running
because little pieces of food could be thrown out of the feed funnel.
• Take care handling the crossed-blade knife because it is very sharp.
•
Never
put foreign substance or hard objects into the feed funnel.
•
Never
repair the mincer yourself. If you discover or suspect a fault, send the mincer immediately
to your local service workshop for competent examination and repair.
•
Store and use the appliance in a clean, frost free environment where it is protected
from dampness, moistness and immoderate and extraordinary burden (such as: downfall, beat,
overheating, moisture in the motor block) .
•
The mincer is intended for use in the household only!
Assembling
Before first usage: Rinse all the units of the appliance that come into contact with food with water
and clean them with dishwashing detergent. Operate according to the instructions ´Care and
cleaning´.
WARNING:
Ensure that the appliance is switched ‘OFF’ at the power outlet and the power
cord is unplugged.
1. Place the mincer on a flat, dry surface such as a bench top.
23
41402_Manual_Neu.qxp 20.12.2006 11:42 Seite 23
