24
• You can crisp up rolls by cutting the rolls in halves, using a sharp knife, and acti-
vating the Single-Side Taosting Function. Ensure, that the slices are max. 3 cm
thick and will not stick in the slots (see: ›Single-Side Taosting Function‹). Alterna-
tively, to toast rolls as a whole, place the rolls tray on the toaster and then place
the rolls on the rolls tray.
• Smaller bread slices may be removed easier by lifting the on/off handle to the
HIGH LIFT position (ca. 2 cm above the idle position).
• Ensure to make an even and smooth cut. Use a sharp bread knife for cutting.
Remove crumbs and protruding rims, especially when crisping up halved rolls.
WARNING:
Never insert your fingers in the slots, while the toaster is connected
to the power supply. Always switch off and unplug the appliance and wait for the
appliance to cool, before removing any jammed bread or crumbs.
• If bread sticks or jams in the slots, switch off (CANCEL button) and unplug the
toaster and let the toaster cool down. Then remove the bread slices carefully and
without violence. Ensure not to touch the heating elements on the sides of the slots
to avoid damage.
• To check the doneness during the toasting process, just lift the on/off handle to the
HIGH LIFT position for a moment and, then lower the handle to the LIFT & LOOK
position again; this will not interrupt the toasting process.
• The LED display of the appliance stays lit up until the power cord is removed from
the power outlet.
• It is recommended to empty the crumb tray after each use to avoid crumbs beco-
ming charred and sticking on the crumb tray (see: ›Care and Cleaning‹). Do not
use the toaster without the crumb tray in place.
• If one of the function buttons (DEFROST, REHEAT, or Single-Side Toasting) was
pressed, the toaster switches back to normal operation automatically after the
function program has finished.
THE DEFROST FUNCTION
The DEFROST function enhances the toasting time for toasting frozen bread.
1. Insert the frozen bread slices in the slots and select the desired browning.
2. Carefully press down the on/off handle until it engages in the LIFT & LOOK posi-
tion.
3. Press the DEFROST button. The power indicator of the button illuminates.