57
Continuous Blending Action
The Kinetix Blade System ensures there are no spaces for food to get caught or trapped.
The patented extra wide blades are contoured to the base of the blender jug meaning
food can never jam or escape the high speed blades. There are no dead zones, so food
is 100% blended with no over or under blended ingredients.
Motor Overload Protection
Your blender is equipped with motor overload protection. If your blender is overloaded
the motor will stop and the ›Overload Protection‹ warning on the LCD will start to flash.
Please do not attempt to use the blender while the ›Overload Protection‹ warning is flas-
hing.
Once the warning stops flashing the blender has cooled sufficiently and is ready to use
again. Re-select the desired speed or function button. If you have turned off you will
need to switch it back on, wait for the flashing to stop then re-select the desired speed
or function.
We recommend removing a portion of the mixture, cutting food into smaller pieces of
even size and/or processing a smaller amount per batch.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
DISASSEMBLING THE BLENDER JUG
1. Always turn the appliance off (all buttons are deactivated and the LCD timer screen
is switched-off), wait until the motor stops and unplug the appliance before assem-
bling/disassembling. Always completely assemble your appliance before you put
the plug into the power outlet.
2. Remove the blender jug from the motor base by grasping the handle and lifting the
jug in an upward direction.
3. Take the lid off the blender jug and empty the blender jug.
4. Take the clear refill lid and twist it anticlockwise to take it out.
Note:
The refill lid has two small guiding pins that fit in the matching gaps of the lid. Pull the
inner lid up to remove it.
5. Remove the blade assembly housing by upturning the blender jug and twisting the
Blade Removal System clockwise to unlock, then lift upwards and away from the
base of the blender jug.