33
USING THE STAINLESS STEEL BLENDER
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing and milkshakes.
WARNING:
Always release the ON-button, wait until the motor stops and
unplug the appliance before lifting the blending tool out of the food, laying down the
appliance or assembling/dismantling the blending tool.
Before connecting the appliance to the mains power supply, always ensure that the
appliance is assembled correctly, according to the following instructions.
Do not
touch the blades of the blending tool with your hands or any objects (i.e. hair, clo-
thes, tissue), when it is mounted and the appliance is connected to the mains power
supply. Before pressing the ON-button, immerse the processing tool in the food (up
to the half of its height at most), to avoid excessive splashing and dripping of liquids
onto the appliance.
1. Prepare your food and fill it into a sufficiently large and high-sided vessel (like the
vessel provided).
WARNING:
The provided vessel is not heat resistant. The max. temperature is
70 degrees. Let the boiling food cool down a little bit before starting to blend.
2.
Ensure, that the appliance is unplugged.
3. Place the shaft of the stainless steel blender onto the motor block and press toge-
ther until it snaps into place. There may be no gap between the motor housing
and the stainless steel blender. The blender shaft must be locked firmly and may
not wobble.
4. Immerse the stainless steel blender into the food. Choose the speed with the vari-
able control switch. It is to be expected, that the food will splash during operati-
on. When processing hot meals, do not hold the appliance in the rising steam to
avoid condensation on the motor housing. Immediately wipe off condensate on
the motor housing. The lower part of the stainless steel blender should be always
covered with food to avoid splashing.
Note:
Process food with a sufficient amount of liquid.
5. Connect the power plug to a suitable wall power outlet.
6. Hold on to the vessel with one hand and press the ON-button to start the motor.
Slowly circle the blender during operation. Hold the hand blender upright in the
mixing vessel during operation to avoid splashing.
