EN
107
USING THE GRINDER
You can grind the coffee powder directly into the filter basket via the integrated grin-
der of the machine. With every start of the grinding action, the correctly measured
out dosage for 1 cup or 2 cups is given off.
NOTE
If you wish to use the double amount that is programmed for 1 cop, you may sim-
ply start the grinder twice. Alternatively, you may grind the dose that is program-
med separately for 2 cups.
IMPORTANT -
Do not fill any coffee powder into the POD filter basket, because
this filter basket is for coffee pads only.
The grinder is disabled during pre-heating of the water system. After switching on
the machine, wait until all buttons illuminate continuously. Before using the grinder,
ensure that the bean hopper is filled with an appropriate amount of coffee beans
(max. 220g).
NOTE
On usual operation, the grinder stops after delivering the pre-programmed amount.
However, you can stop the grinding action manually any time during operation.
The grind size can be adjusted via the grind size dial (see: ‘Changing the Default
Settings / Setting Up the Grinder’).
7. Ensure that the portafilter and filter basket are completely dry.
8. Ensure that the bean hopper is filled with a sufficient amount of coffee beans. If
required, refill the bean hopper.
9. Push the portafilter in the grinder cradle below the grinder outlet.
10. Shortly press the grinder button for starting the grinder. The grinder gives off 1
portion of coffee powder, programmed for 1 cup espresso.
NOTE
After pressing the grinder button, the grinder starts with some short delay. The dosa-
ge programmed for 2 cups espresso is accessed by pressing the grinding button
twice within this delay time.
11. If you wish to grind the amount, programmed for a double shot, press the grinder
button twice in quick succession.
