EN
49
Problem
Mögliche Ursache
Die einfache Lösung
Coffee beans are wedged
in the bean hopper base
or grinder intake.
Unplug the appliance and remove the hopper lid. Careful-
ly stir the coffee beans in the bean hopper a little. Then
try again. Carefully turn the lock dial to and fro. If the
problem persists, remove the bean hopper. Then remove
the coffee beans from the grinder intake.
The grinder got blocked
during operation.
Unplug the appliance and remove the blockage (see: ‘Ope-
ration / Removing Blockages’).
CAUTION:
Do not poke in
the openings of the grinder (bean hopper base or powder
outlet). You cannot remove the blockage this way!
You cannot unlock the bean
hopper. The lock dial does
not turn.
A coffee bean is jam-
med at the bean hopper
base, blocking the closing
mechanism.
Without violence
, turn the lock dial to and fro a little to
get the coffee bean out of the closing mechanism. If the
problem persists, prepare the appliance for operation and
let the grinder work for a moment. Then try again.
CARE AND CLEANING
WARNING
–
Always ensure that the appliance and all its parts and
accessories are out of reach of young children and animals.
Always unplug the
appliance, before moving and/or cleaning the appliance. Do not disassemble or
assemble any parts, while the appliance is connected to the power supply.
The grinding tools in the grinder chamber are edged. Touch the grinding tools with
care.
To avoid hazards due to electric shock and damage:
Do not clean the appliance
in an automatic dishwasher!
Do not immerse the housing, grinding sleeve, power
plug, or power cord in any liquid,. Do not spill or drip any liquids on the housing,
power cord, or in the grinder chamber or in the mounted bean hopper. To protect
yourself from electric shock, do not touch the housing or the power cord with wet
hands, while the appliance is connected to the power supply.
Do not use violence. Do not use any abrasive cleaners or cleaning pads (e.g. metal
scouring pads) for cleaning the appliance or any part of it, to avoid damage to the
surfaces. For cleaning the grinder chamber, do not use any hard or sharp-edged
foreign objects. Only use a completely dry brush (provided cleaning brush or ano-
ther small nylon brush) for cleaning the grinder chamber. Always keep the grinder
chamber completely dry.
Hygienic cleaning is performed according to the following instructions.
