80
ERROR MESSAGES OF THE APPLIANCE
Note
If an error message is given, the appliance will not work. The error message dis-
appears and the appliance re-assumes operation automatically, as soon as the
problem is solved.
Error Message
Meaning
Required Action
“Er1” flashes on the Touch-
screen. An acoustic signal
sounds every 3 seconds.
The upper grilling plate is
missing or not installed
correctly.
The appliance can be operated only with both grilling plates
installed properly. Ensure to insert and lock the upper grilling
plate correctly (see: ‘Assembling the Appliance’).
Ensure that the connectors on the underside of the grilling
plate are clean, smooth, and undamaged without any corro-
sion. If required, clean the connectors.
“Er2” flashes on the Touch-
screen. An acoustic signal
sounds every 3 seconds.
The lower grilling plate is
missing or not installed
correctly.
The appliance can be operated only with both grilling plates
installed properly. Ensure to insert and lock the lower grilling
plate correctly (see: ‘Assembling the Appliance’).
Ensure that the connectors on the underside of the grilling
plate are clean, smooth, and undamaged without any corro-
sion. If required, clean the connectors.
“Er3” flashes on the Touch-
screen. Maybe, an acoustic
signal sounds every 3
seconds.
You attempted to activate
the temperature control fea-
ture, without connecting the
temperature probe to the
appliance.
Remove the storage tray and insert the plug of the temperature
probe into the probe connector “PROBE” on the left side of the
control panel (see: ‘Preparations’). Perhaps, you must remove
the storage tray of the temperature probe first for getting access
to the probe connector.
The plug of the temperature
probe is not installed cor-
rectly or polluted.
Ensure that the plug of the temperature probe is completely
undamaged, dry and clean. Insert the plug correctly into the pro-
be connector. If required, turn the plug to and fro in the probe
connector to improve the connection to the appliance. If required,
clean the plug using a damp cloth, and wipe dry thoroughly.
The tip or cable of the tem-
perature probe is damaged.
Replace the temperature probe.
However, you can operate the appliance without the tempe-
rature probe. Touch the probe button on the display area for
deactivating the temperature probe.
“Er4” flashes on the Touch-
screen. An acoustic signal
sounds every 3 seconds.
A serious malfunction
occurred.
Immediately unplug the appliance and let the appliance cool
down completely (approx. 30 minutes). Thereafter, try to put
the appliance into operation again.
If the problem persists, return the appliance to an authorized ser-
vice centre for examination and repair.