40
41
note:
the volume, texture, and taste of froth vary depending on the fat content and
amount of milk and flavouring used. the milk frother produces the greatest volume
of rich, thick, froth using cold, fat free milk. 0,3%,1,5%, 3,5% and whole milk froth
well, but due to a higher fat content they produce a froth with a slightly different
texture and less volume but sweeter. to prepare toppings for coffee or dessert,
using the maximum amount of milk will produce approximately 3-4 servings gene-
rous servings.
note:
to make flavoured froth, frothy drinks, dessert toppings or desserts, you may add
syrups, powders, sugar, sugar substitutes or liqueurs to the milk. See milk froth reci-
pes in the back of the manual instructions.
5. Place the lid on the jug and ensure the it is closed properly.
6. Place the jug onto the power base. the electric contacts of the multi-directional
power base will slide into a corresponding opening in the bottom of the jug. the
power base will work out in any orientation. the start button is on the jug (picture
e).
7. Place the plug into the power outlet
frothing warm milK
a. Press once for 1 second on the start button.
B. the button lights up red. the appliance starts to heat the milk and froth.
c. the foaming process is completed when the button is no longer illuminated.
Capacities:
100 ml milk (MiN mark) result in about 300 ml of milk foam.
150 ml milk (MAX mark FROTH) result in about 350 ml of milk foam
frothing cold milK
a. Press once for 3 seconds the start button.
B. the switch lights up blue. the appliance begins to foam the milk without heating.
c. the foaming process is completed when the button is no longer illuminated.
Capacities:
100 ml milk (MiN mark) result in about 150 ml of milk foam.
150 ml milk (MAX mark FROTH) result in about 280 ml of milk foam
heating milK
a. Press quickly twice on the start button.
B. the switch flashes red. the appliance starts to heat the milk.
c. the heating process is completed when the buttonswitch is no longer illuminated.
Capacities:
maximum of 250 ml of milk (MILK MAX mark)
minimum of 100 ml of milk (MiN mark)
8. Once the heating and frothing or whipping cycle is complete, the appliance will
shut off automatically. the button is not illuminated any more.
note:
the heating and frothing cycle can be stopped at anytime by simply lifting the jug
off the power base or by pressing the start button twice.
9. after frothing allow 1 minute for the hot milk to settle after the cycle is complete.
take the lid of the jug and pour desired amount of hot milk for cappuccinos,
Lattes or other Specialty Drinks. take a spoon to hold back the froth when pou-
ring the milk.
note:
Remember that the liquid milk heats to a higher temperature than the froth. if serving
to children, wait until hot milk cools slightly or stop the frothing & heating cycle
earlier by lifting jug off the power base.
10. Spoon out the exceptionally rich froth. if desired, the jug can be removed from
the power base and used for serving. if you want the milk froth or hot milk pour
out, please ensure that the attachments will be hold back. they may fall out,
because it is loose on the clutch.
11. after processing the milk froth, unplug the appliance from the power outlet.
12. after each use, clean your appliance following the ›care & cleaning‹ instruc-
tions. Remember to rinse in cold water before each use. Do not let any food dry
onto the appliance.
attention:
Use liquid food for frothing only and only add powder for flavouring.
Solid food can damage the milk frothing spiral and the motor and therefore are not
permitted for use.