45
imPoRtaNt safEguaRDs
Save the instructions for further reference. Do not attempt to use this appliance for any other
than the intended use, described in these instructions. Any other use, especially misuse, can
cause severe injury or damage by electric shock, fire or moving mechanical parts. These
instruction is an essential part of the appliance. When passing on the appliance to a third
person, ensure to include these instructions.
Never leave the appliance unattended when in operational mode.
Any opera-
tion, repair and technical maintenance of the appliance or any part of it other than described
in these instructions may only be performed at an authorised service centre. Please contact
your vendor.
•
waRNiNg:
To avoid injury to persons and damage, always turn the appliance off,
wait for the motor to stop completely and unplug the appliance, immediately after operation
and before assembling/disassembling or cleaning the appliance. Never use force operating,
assembling or disassembling the appliance.
•
waRNiNg:
The blades are very sharp. Pay attention when handling the parts. Only
touch the blade assembly housing when handling the blades. Handle with care when cleaning.
• Note:
Ensure the appliance is properly assembled and the blade assembly housing and
the silicon seal are properly attached before connecting the plug into the power outlet. Never
turn the appliance on without the lid or inner lid. Never place the holder or the blade only on
the motorblock. Never touch the drive gear when the plug is connected to the power outlet.
•
waRNiNg:
If the blade is mounted in the blender jug, the blender jug is positioned on
the motorblock, and the plug is connected to the power outlet, do not insert your fingers, a
wooden or plastic spoon or similar cooking utensils or foreign substances in the blender jug.
Always take the blender jug off the motorblock before pushing the food down with a spoon.
•
waRNiNg:
Never place the blender jug on the motorblock without the blade assembly
housing. Without the blade assembly housing the bottom of the blender jug is open. Liquids
could spill and might damage the motorblock.
•
If the blender jug is not securely locked on the motorblock, the appliance does not work.
• imPoRtaNt: Ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation. the motor
will not start before the plug is plugged into the power outlet, the blender
jug is securely locked onto the motorblock and the appliance is switched on.
• Do not operate the appliance continuously with heavy loads for more than 10 seconds.
Allow the motor to rest for 1 minute before you continue.
• Do not
chop extremely hard food, such as nuts with shell or bones to avoid overrunning,
spurt out or that the motor stalls or stucks during operation because the blade is blocked.
•
waRNiNg:
Do not operate the appliance when the blender jug has a crack or any
part of it is likely to be damaged. The appliance is likely to be damaged if the appliance
was subject to inadmissible strain (i.e. overheating, mechanical, or electric shock) or if there
are any cracks, excessively frayed parts, distortions or the motor stalls or stucks. In this case,
immediately unplug the appliance and return the entire appliance (including all parts and
accessories) to an authorised service centre for examination and repair.
