29
• Operate the appliance on a well accessible, stable, level, dry, and
suitable large table or counter that is resistant against water and fat.
The power outlet must always be easily accessible so that it would
be possible to unplug the appliance immediately in case of any mal-
function or danger.
• Always keep the appliance and the table or counter clean and dry,
and wipe off spilled liquids immediately. Do not place any clothes or
tissue or other foreign objects under or on the appliance during ope-
ration, to avoid risk of fire, electric shock and overheating. Do not
place the appliance over a power cord or on wet or inclined surfaces
(e.g. sink or drain board).
• This appliance is NOT intended for use or handling by persons (inclu-
ding children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children must always be supervised to
ensure that they do not play with the appliance or any parts of the
appliance or the packaging.
Always keep the appliance where it is
dry, frost-free, and clean, and
where young children cannot reach
it.
Do not leave the appliance or any part of it unattended, when in
reach of young children.
• Do not place the appliance or any part of it on or near hot surfaces
(e.g. burner, heater, or oven). Do not use any parts of the appliance
with any other device or for any purpose not described in this booklet.
Before plugging in, always ensure that the appliance is assembled
completely and correctly according to the instructions in this booklet.
Do not handle the appliance or any part of it with violence.
• The blades are extremely sharp. Always use special care when hand-
ling the cutting assembly in any way.
DO NOT touch the blades with
unprotected hands or sensitive objects
to avoid severe injuries and
damage.
For removing the upper and middle pair of blades of the
cutting assembly, always use the disassembling tool according to
the instructions given in this booklet.
Do not place the cutting assem-
bly on delicate surfaces.
