background image

3015-5575 Rev 0

 

 

 

 

621 Hunt Valley Circle 

New Kensington, PA 15068 

3015-5575 

Tel:  724-334-5000 

Revision 0 

Fax:  724-334-5001 

June 2011 

 

 

Microprocessor Module Replacement Kit 

for H25-IR Infrared Gas Leak Detectors 

 

Instruction Manual 

 

 

 

 

1.  Scope 

The Bacharach H25-IR family of gas leak detectors is designed for easy maintenance and enhancement.  One element of 

that design is the ability to replace system programming (firmware) with a simple plug-in microprocessor module, 

minimizing downtime. 

 

This instruction manual describes how to replace or upgrade the microprocessor module in your H25-IR infrared gas leak 

detector.  It is assumed that the user is familiar with the operation of the device.  If necessary, refer to the instructions for 

detailed operation and maintenance information for each H25-IR model. 

 

2.  Items Required 

  Replacement Microprocessor Module Kit (P/N: 3015-5578) 

  Medium Phillips head screwdriver 

  H25-IR instruction manual (optional) 

 

 

 

WARNING:  

Failure to comply with these instructions may void the warranty. 

 

Содержание Microprocessor Module Replacement Kit









Отзывы: