(-), turning it counter- clockwise the flow is increased (+). We recommend that
you let the constructor to adjust it (or the specialized personnel of the authorized
local dealer who sold the appliance).
Before you perform these works, you should turn off the switch of the appliance
or turn off the corresponding switches so that no current flows, or turn off the
power supply switch.
INDICATION:
The feeder should not operate while dry, since it will loose its
suction properties. It is necessary that you have filled the storage compartment
before the appliance’s installation, so that the feeder operates correctly during
the first wash.
Do not use caustic products. If you do not follow this indication, you will not be
covered by the guarantee.
2.7 Starting the washing program - Filling the boiler
•
Check that the suction filter, in the tank, has been
placed in the correct position.
•
Check that the overflow hose is inserted correctly in
its inlet.
•
Make the connection with water supply and drainage
according to the instructions.
•
Push ON-OFF switch (No.1 - Page 3)
•
The dishwasher is automatically filled with water up
to the set water level.
•
The indicator lights on (Nο.4 - Page 3)
showing us that the boiler’s heating has started.
•
When the water of the boiler is heated, the corresponding LED lights off
(Nο.4 - Page 3) and a new LED lights on (Nο.5 - Page 3) showing us
that the water in the dispenser is heating up.
Note 1: At the model 35 (basket 35 x 35) the indicator (No. 4 - Page 3)
continues to light on while the boiler is heating.
•
When this LED lights off, then the dishwasher is ready for wash.
•
Open the door. Insert the basket with the items (dishes, glasses, etc.). Before
Overflow hose
Suction filter
inserting the basket with the items, be sure that all food residues have been
removed.
•
Add the liquid detergent manually in the dispenser, unless the dishwasher
has a detergent pump. Check the level of the rinse aid and detergent storage
compartment.
•
In order for the washing program to start, push the START button (
No.
2 - Page 3).
At the model 1500 (Hood type) the washing program starts closing the door.
•
The washing program, lasting 2 min., starts automatically, while at the same
time the LED (Nο.6 - Page 3) of the program’s start lights on, washing and
rinsing the items inserted.
Note 2: If the door does not close properly, the dishwasher does not function and
the LED (No. 7 - Page 3) lights on.
•
When the washing program is finished, the program LED (Nο.6- Page 3)
lights
off.
Open the door and remove the basket with the clean items.
•
Let them dry.
If, following the wash, there are stains from dirt or water spots, the cause may be
one of the following:
•
Wrong quantity of detergent in respect of water.
•
Rinsing water with high capacity of mineral elements.
•
Insufficient quantity of rinse aid during rinsing.
•
Wrong loading of the items in the basket.
•
Low water pressure during rinsing.
•
Low water temperature during washing.
•
Filters are clogged or miss-positioned.
RECOMMENDATION:
For a better result, especially with glasses, use water
softener.
2.8 Safety arrangements
There is a safety adjustment at the door, which interrupts the appliance’s operation
during washing, if the door opens by mistake.
There is thermal protection integrated in the pump motor winding with automatic
UK
30
