Gason Pasture Planter Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 106

background image

VRT Hydraulic Drive

– Calibration

Page 23

10/09

12. Record the sample weight and input this

information  into  the  monitor  in  kg  in  the
‘TEST  WEIGHT’  area  on  the  Product
Calibration  screen.  Check  that  the  ‘TEST
PULSES’ value is as per your setting. A small
increase in pulses is normal (eg. set at 600,
will  run  and  record  602)  because  the
hydraulic motor will overrun slightly.

13. Update the pulses/kg by pushing the soft key

under the ‘UPDATE’ prompt.

14.

Push  soft  key  under  ‘BACK’  prompt  to  go
back  one  menu  screen  to  the  ‘RATES’
screen. If the main bins need to be calibrated
this is done by highlighting the BIN prompt at
the top left hand side of the screen and using
the up or down navigator keys to select the
appropriate bin.

NOTE: If a product has previously been
calibrated in the pasture planter bin but for a
different trip, a pulses/kg figure will be displayed.
It is recommended that the operator

re-calibrate

the Pasture Planter with the current product and
meterbox set up. This operation will ensure that
any change in the product’s bulk density, flow
rate or meterbox setup will be confirmed.

On completion of the calibration process, close
the Pasture Planters bottom door.

15. When finished calibrating, return to the main

screen by pushing the soft key under the
‘EXIT’ prompt.

16.

Ensure  that  all  of  the  information  displayed
on  the  main  screen  is  correct.  The  pasture
planter  will  be  displayed  as  the  forth  bin  at
the  bottom  of  the  screen.  To  check  the
application  rate  from  this  screen,  touch  the
soft key directly to the left of the product and
the  preset  rate  will  be  displayed  for  3
seconds.  The  rate  will  then  return  to  zero
until the seeding operation begins. Bins to be
operated should display the READY prompt.
You  can  change  the  status  of  each  bin  by
holding the soft key directly to the left of the
product down for 3 seconds.

NOTE:

After

completing

the

calibration

procedure  it  is  recommended  to  record  the
various  values  on  the  record  sheet  provided
(page 21-22) for future reference.

Page 3

«
...
25
26
27
28
29
...
»

Содержание Pasture Planter











































































































Отзывы:

Нет отзывов

Похожие инструкции для Pasture Planter

Бренд: MAREDO Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды