Gasmate TELLUS GM165-023 Скачать руководство пользователя страница 2

3

2

GENERAL INFORMATION

Gas Installation Codes

•   Barbecues must be used in accordance with New 

Zealand Standard 5601 “Gas Installations”.

•  Barbecues for use with bottled gas are labelled  

LPG/ULPG.

•  Barbecues for use with natural gas are labelled ‘natural 

gas’ and must be installed by an authorised person. 
Check the gas type sticker attached to the barbecue.

When connecting the hose and regulator assembly to the 
gas cylinder, take care to avoid unnecessary twisting or 
kinking of the flexible hose.
After the assembly has been secured, turn on the gas 
and check for leaks by brushing a soap and water 
solution over all connections.

Clearances

Minimum clearances from combustible materials must be: 
Rear - 600mm & Sides - 600mm

Hose & Regulator Safety

The regulator and hose assembly supplied with the 
barbecue are suitable for LPG only.
A gas regulator adjusted to have an outlet pressure of 
2.75kPA is supplied for connection to the LPG cylinder. 
The pressure regulator and hose assembly supplied 
with the barbecue must be used. Replacement pressure 
regulators and hose assemblies must be those specified 
by the barbecue manufacturer.

Failure to comply with these instructions 
could result in a fire or explosion which 
could cause serious bodily injury, death or 
property damage.
Accessible parts may be very hot.
Keep young children away.
Any modifications of this barbecue may be 
dangerous.
Do not move this barbecue during use.
Turn off gas supply at the cylinder after use.
Read instructions before using the barbecue.
Parts sealed by the manufacturer or their 
agent must not be manipulated by the user. 
This barbecue is only to be used outdoors.

If you are unable to correct the leak by tightening the 
connections, turn off the gas and contact the supplier 
immediately.
Always ensure the barbecue is kept away from flammable 
materials and the gas cylinder clear of any heat source. 
When changing over from an empty gas cylinder to a full 
one make sure this procedure is carried out in a flame 
free atmosphere.

Specifications

Barbecue specifications can be found on the data label 
attached to the door panel or the barbecue body.

Gas Cylinder Use & Safety

This is a low pressure barbecue and must only be used 
with the hose and regulator supplied. Your barbecue is 
designed for use with 9Kg LPG cylinders.

The cylinder should be filled by a reputable gas supplier 
and visually inspected and re-qualified at each filling.
Always keep cylinder in an upright position. Always close 
the cylinder valve when the barbecue is not in use.
Do not subject the cylinder to excessive heat.
NEVER STORE YOUR GAS CYLINDER INDOORS.
If you store your barbecue indoors, ALWAYS disconnect 
the cylinder first and store it safely outside. Cylinders 
must be stored outdoors in a well ventilated area out of 
reach of children, and must not be stored in a building, 
garage or any other enclosed area.

Never operate this barbecue without a 
regulator

Do not test for gas leaks with an open 
flame

If this information is not followed exactly 
a fire causing death or serious injury may 
occur. Do not store a spare gas cylinder 
under or near this barbecue. Never fill the 
cylinder beyond 85% full. This barbecue is 
only to be used and stored outdoors.

If you smell gas
1. Shut off gas to the barbecue at its 

source, if possible.

2. Extinguish any open flame.
3. If odour continues immediately call your 

gas supplier or fire department.

Read carefully before assembling and 
operating your barbecue.

Do not connect your barbecue to a gas 
cylinder exceeding this capacity.
Never connect an unregulated gas cylinder 
to your barbecue.

Содержание TELLUS GM165-023

















Отзывы: