Gasmate SOLARIS Series, Руководство по эксплуатации, установке и обслуживанию

Страница: 8 / 20

8
START - TURNING THE HEATER ON
1. Before operating this appliance:
If there is any uncertainty in relation to the guidelines
stated in this instruction manual or to obtain a copy,
please call the Sitro Service Team on 1300 174 876
(Mon – Fri) 8.00am – 5.00pm or Email
service.group@sitro.com.au for technical support.
2.
Turn the gas supply on:
- If the heater is connected to a ball valve
socket containing an on/off tap, then turn the
gas on at the tap. See image 1
- If the heater is connected to a bayonet point
then you can move straight to step 3, as the
gas is already flowing to the unit. See image 2
3. Ensure the appropriate gas pressure is set:
Refer to page 2 of the instruction manual under the
heading Gas Requirements.
4.
Turn the power on at the power point.
5. Automatic Ignition: Once the power is turned on and
gas is flowing to the unit, it should automatically
begin to ignite the heater. Visually you should see
a spark at the base of the centre tile, which will
eventually ignite the gas and light the tiles. See
image 3
- Once the heater is lit the tiles will start to
glow orange giving indication that the unit is
fully functional.
RH200 SOLARIS DELUXE HEATER – OPERATING INSTRUCTIONS
IMPORTANT
It is imperative that you ensure that the gas
installation and power installation has been
carried out in accordance with the manufacturers
guidelines in this instruction manual. A certificate
of compliance should be provided by the licenced
installer at the completion of any installation.
Make sure you read the instruction manual
thoroughly prior to use.
IMAGE 1
IMAGE 2
IMAGE 3
Ignition Spark