9
8
CLEANING THE BURNER
Follow these instructions to clean
and/or replace burners.
1. Turn gas off at control knobs and gas cylinder.
2. Remove cooking grates and grease tray.
3. Remove screw at end of burner using a
screwdriver.
4. Carefully lift each burner up and away from
valve openings.
CAUTION:
Inspect burner for any damage (cracks or
holes). If damage is found, replace with a new burner.
Reinstall the burner, ensuring they are located on the gas
valve.
We suggest three ways to clean the burner tubes. Use
the one easiest for you.
(A) Bend a stiff wire (a light weight coat hanger works
well) into a small hook. Run the hook through each
burner tube several times.
(B) Use a narrow bottle brush with a flexible handle (DO
NOT use a brass wire brush), run the brush through each
burner tube several times.
(C) Wear eye protection: use an air hose to force air into
the burner tube and out the air ports. Check each port to
make sure air comes out each hole.
5. Wire brush entire outer surface of burner to
remove food residue and dirt.
6. Clean any blocked ports with a stiff wire such as
an open paper clip.
7. Check burner for damage, due to normal wear
and corrosion some holes may become
enlarged. If any large cracks or holes are found
replace burner.
8. Carefully refit burners, ensuring they are
located on the gas valve.
9. Replace screw at the end of burner.
10. Replace grease tray and cooking grates.
