Gasmate ORBITOR BQ1079 Скачать руководство пользователя страница 13

12

13

GENERAL INFORMATION

CONNECTING & DISCONNECTING 
TO GAS SOURCE

Familiarise yourself with the general information 
and safety guidelines located at the front  
of this manual.

Check

1.  Gas cylinder is filled. 
2.  The burner control is in the ‘OFF’ position

Connecting

1.  Ensure valve is in OFF position.
2.  Check for any damage to  

the cylinder connection.

3.  Attach the regulator to the cylinder valve.
4.  Use a soapy water solution to check  

the joint. If bubbles appear the connection  

will need to be re-tightened.

 IMPORTANT

•  IMPORTANT: Before connecting and 

disconnecting barbecue to gas source, 
make sure burner controls are in  
‘OFF’ position.

•  CAUTION: When the barbecue  

is not in use, the gas cylinder must  
be disconnected.

•  Check that the seals between  

the appliance and the gas cylinder  
are in place and in good condition  
before connecting the gas cylinder.

•  Do not use this appliance if it has 

damaged or worn seals.

•  NOTE: If for some reason, ignitor fails  

to produce a spark at the electrode, 
barbecue can be lit by a long barbecue 
match with hood open insert the match 
into a hole on the underside of the 
barbecue and turn gas control to high.

•  Check performance of burner prior  

to installing barbecue plates.

•  Do not smoke when attempting  

to ignite barbecue.

•  Never use volcanic rock, heat beads  

or other material.

•  Always use protective gloves when 

handling hot components.

LIGHTING PROCEDURE

Burner Operation & Ignition System Check

1.  With cylinder valve in ‘OFF’ position check  

the Piezo igniter by pushing in and rotating  

the control knob anti-clockwise. Check for 

sparking to the burner.

2.  If spark is not evident at the burner ignition 

point, check that the ignition lead is firmly 

attached to the control and sparker tip.

3.  With sparking established open the cylinder 

valve, push and turn the control knob  

to ‘HIGH’.

4.  If the burner fails to light after several attempts 

turn off gas and inspect for obstructions  

to gas flow.

5.  If re–ignition is necessary while the gas 

barbecue is still hot, you must wait for a 

minimum of 5 minutes before commencing  

to re–ignite (this allows accumulated gas 

fumes to clear).

Overall Barbecue Dimensions

Length

Width

Height

650mm

360mm

370mm

Содержание ORBITOR BQ1079

















Отзывы: