Gasmate NOMAD1 Скачать руководство пользователя страница 12

13

12

OPERATION

 IMPORTANT

The hood must be in the open position for lighting.
Do not smoke at any time when attempting to ignite 
the barbecue burner.  
Do not leave the barbecue unattended when alight.

BURNER OPERATION & IGNITION SYSTEM CHECK

Problem

Possible Reason

Solution

Burner will not ignite

Control knob is closed

Turn knob to high when lighting

Igniter is faulty

Use a long barbecue match inserted through the 
hole on under side of barbecue

Food is not cooking 
or is taking too long

Burner has gone out

Check that the gas bottle is not empty and re-
ignite the burner

Cooking surface was not given 
enough time to warm up before the 
food was applied

Remove the food and give the burner time to 
warm the cooking surface (5-10 mins)

There is too much food on the 
cooking surface

Cook smaller portions

OPERATING PROCEDURE 

Cooking

The control knob can be turned from ‘HIGH’ to ‘‘LOW’ 
depending on the heat required.
With the hood down the burner must only be used on 
‘LOW’.

Servicing

Servicing should be conducted every year or sooner if 
required. 
The appliance must only be serviced by an authorised 
person.

 IMPORTANT

•  IMPORTANT: Before connecting and disconnecting 

barbecue to gas source, make sure burner 
controls are in ‘OFF’ position.

  •  CAUTION: When the barbecue is not in use, the 

gas cylinder must be disconnected. 

•  Check that the seals between the appliance 

and the gas cylinder are in place and in good 
condition before connecting the gas cylinder.

•   Do not use this appliance if it has damaged or 

worn seals. 

•  NOTE: If for some reason, ignitor fails to produce 

a spark at the electrode, barbecue can be lit by 
a long barbecue match with hood open insert 
the match into a hole on the underside of the 
barbecue and turn gas control to high.

•  Check performance of burner prior to installing 

barbecue plates.

•  Do not smoke when attempting to ignite 

barbecue.

•  Never use volcanic rock, heat beads or other   

material.

•  Always use protective gloves when handling hot 

components.

Содержание NOMAD1

















Отзывы: