Gasmate Keystone GM142-140, Руководство пользователя

Страница: 9 / 12

9 8
TROUBLE SHOOTING
8
Problem: Condition: Solution suggested:
Appliance won’t
light Igniter pin and burner are wet. Wipe dry with a cloth.
Igniter battery is incorrectly
inserted. Check that battery is correctly inserted.
Igniter pin cracked or broken. Contact retailer where purchased for replacement part.
Electrode wire is loose or
disconnected. Reconnect wire to the igniter box
located inside the table base behind
the igniter button.
Burner will not
light using a
match No gas flow. Check if gas cylinder is empty. If yes, replace.
Regulator is not fully connected to
the tank. Check gas cylinder connection.
Gas flow is obstructed. Check hose for bends or kinks.
Spider webs or insect nest in the
venturi (end of burner tube). Clean the venturi.
Burner ports are clogged. Insert an opened paper clip into each of the burner
ports to clean them. Ensure the appliance is off and all
parts are cooled before attempting to clean the burner
ports.
Appliance emits
a lot of black
smoke
when lit Flame is obstructed at burner ports. Make sure all the gas burner ports are free of any lava
rocks or debris to allow the gas to flow freely.
Regulator hose is pinched. Check the regulator hose for bends or kinks.
Sudden drop in
gas flow No gas flow. Check if gas cylinder is empty. If yes, replace.
Excess flow safety valve has been
activated. Turn the control knob to “OFF”, Close the gas cylinder
valve and disconnect the regulator from the cylinder.
Turn the control knob to “HIGH”. Wait 1 minute. Turner
the control knob to “OFF”. Reconnect regulator to gas
cylinder. Open cylinder valve slowly. Light appliance as
indicated in “To Light” section.
Flame blow out High or gusting winds. Increase flame to “High”.
No gas flow. Check if gas cylinder is empty. If yes, replace.
Excess flow safety valve has been
activated. See “Sudden drop in gas flow” above.
Irregular flame
pattern or flame
does not come
out of the entire
length of the
burner Burner ports are clogged. See “Burner will not light using a match” above.
Note: If the appliance cannot be adjusted to perform correctly it should not be used until serviced or repaired.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Any modifications or adjustments made to product without prior authority from the
manufacturer will void any warranty claims. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.