Gasmate Ignite BQIG10 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 16

Gasmate Ignite BQIG10 Скачать руководство пользователя страница 4

4

5

GENERAL ASSEMBLY

Connecting & Disconnecting to

the gas source

Familiarise yourself with the general information

and safety guidelines located at the front of this
manual.

Check:

1. The cylinder is filled. A sloshing sound will be

heard when shaken.

2. The burner controls are in the ‘OFF’ position

Connecting:

1. Ensure cylinder valve is in its full off position.
2. Check for any damage to either the cylinder

connection or the hose. NEVER attempt to use

damaged equipment.
3. When connecting the hose to the cylinder

tighten the nut to a positive stop by hand

or spanner.

4. Open cylinder valve fully. If a leak can be heard

  at either end of the hose turn cylinder off and
  tighten joint with a spanner. Wait 5 minutes
  before re-testing and use a soapy water
  solution to check the joint. If bubbles appear,
  the connection will need to be re-tightened.

IMPORTANT

• Before connecting and disconnecting barbecue

to gas source, make sure burner controls are

in ‘OFF’ position.
•

Caution:

When the barbecue is not in use,

the gas must be turned off at the cylinder.

•

Important:

The appliance control knob must

be in the ‘OFF’ position before opening the

cylinder valve.
• Check performance of burner prior to

installing barbecue plates.

• Do not smoke when attempting to ignite

the barbecue.

• Never use volcanic rock, heatbeads or

other material.

• Always use protective gloves when handling

hot components.

•

Note:

If for some reason, ignitor fails to

  produce a spark at the electrode, barbecue
  can be lit by a long barbecue match. With
  hood open insert lighted match into match
  lighting hole positioned on the side of the

BBQ body. Push and turn a control knob to

‘HIGH’. Burner ignition can be checked

through this hole.

Problem

Possible Reason

Solution

Burner will not ignite

Valve on cylinder is closed

Open valve on cylinder

Control knob is closed

Turn knob to high when lighting

Igniter is faulty

Use a long barbecue match

Ignition system check

Disconnecting:

1. Ensure the burner control is in the

‘OFF’ position.
2. Ensure cylinder valve is in the full off position.
For storage and cylinder exchange, disconnect
hose at the cylinder only, DO NOT disconnect hose

from appliance.

«
...
2
3
4
5
6
...
»

Содержание Ignite BQIG10

















Отзывы:

Нет отзывов