Gasmate FLUX GM124-025, Инструкция по эксплуатации

Страница: 9 / 12

9 8 8 9
LIGHTING INSTRUCTIONS
Warning: White smoke may appear round the burner
head during the first minutes of initial firing.
1. Check and ensure that an AA battery is inside the
ignition chamber and has power. Ensure the anode (+)
faces outside.
2. Ensure that the control knob is OFF. Slowly open the
gas cylinder valve.
3. Push in and turn the control knob anti-clockwise to
LIGHT position for 30 seconds whilst simultaneously
pushing the igniter several times until the pilot flame
ignites. Check for pilot flame through glass tube. If the
pilot flame does not ignite immediately, turn control
knob to OFF and wait 2 minutes between ignition
attempts for gas to dissipate.
4. If the pilot is alight, keep control knob pressed for 15
seconds then turn the control knob to ‘LOW’.
5. For maximum heat turn control knob to ‘HIGH’.
6. To turn heater off, turn control knob to ‘OFF’.
7. Turn off the valve on the gas cylinder clockwise and
disconnect the cylinder.
Note: if the burner flames goes out accidentally, turn off
the appliance and wait at least 5 minutes to let the gas
dissipate before relighting. Repeat steps 2 – 4.
Allow at least one minute to purge air through to pilot
after connection to a new cylinder.
IMPORTANT SAFETY RULES
• Never use the heater while it is raining, the glass tube will break.
• The glass tube will be extremely hot when operating, never try to touch it and keep children away from the heater.
• Always ensure the heater is seated firmly, the glass tube may break if the heater falls.
• Never use the heater if the glass tube has any crack or damage.
• THE GUARD IS FITTED TO THIS APPLIANCE TO REDUCE THE RISK OF FIRE OR INJURY FROM BURNS AND
NO PART OF IT SHOULD BE REMOVED.
• ANY GUARD OR OTHER PROTECTIVE DEVICE REMOVED FOR SERVICING THE APPLIANCE MUST BE
REPLACED PRIOR TO OPERATING THE APPLIANCE.
OFF
LOW
HIGH
OFF
LIGHT
LOW
HIGH
OFF
LOW
HIGH
OFF
LIGHT
LOW
HIGH