5
ASSEMBLY INSTRUcTIONS
Note: Remove any transit protection material.
Tools required
Phillips head screw driver and 2 adjustable
spanners.
STEP 1
The lower support leg has a rubber foot at the
bottom. Remove the five screws from each leg,
using them to attach the bottom panel and middle
plate from the inside.
Ensure the magnets on the side of the middle
plate are aligned with the ‘T’ shaped holes on the
side of the bottom panel.
STEP 2
Remove the screws from each of the upper
support posts, using them to attach to the middle
plate from the inside.
Remove the screws from the radiant head, using
them to attach it to the upper posts from the
outside.
STEP 3
Lay the frame down and attach the wheels with
the fasteners removed from them.
