OPERATING INSTRUCTIONS
1. Always operate the Stand Mounted Heater on a dry, stable
and level floor surface, well away from curtains, drapes and
soft furnishings.
DO NOT operate this Product immediately below an
electrical Socket Outlet.
DO NOT operate this Product if the glass front is damaged
or removed.
2. Plug the Power Cord into a Power Outlet and turn ON. To
avoid damage to the Power cord, make sure it is kept away
from the Product when in use.
Note: Dark points may exist on the surface of the heating
element during the first few minutes after it is switched on.
This is normal, and does not affect the heating performance.
Important:
Always operate the Product from a power source
of the same Voltage, Frequency and Rating as indicated on the
Product Identification Plate.
3. When unattended, we recommend you make sure the
Product is turned OFF and DISCONNECTED from the Power
Supply.
Important: Avoid any possibility of a fire hazard by never
covering, positioning or arranging any material near, or restrict
the airflow of the Heater. This Heater is not intended to be
used as clothes or towel dryer.
4. Be sure the Product is turned OFF, DISCONNECTED from
the Power Supply and allowed to cool before moving.
5. When storing the Product, loosely coil the cord. It is
important to allow the Product to cool before storage.
6. When you are not using the appliance, store in a dry place.
CARE & CLEANING
1. After each use, make sure the Product is turned OFF and
DISCONNECTED from the Power Supply. Let the Product
cool after use before moving, cleaning or storage.
2. Clean the exterior of the Product by wiping with a slightly
dampened (not wet) soft cloth. Avoid the use of scouring
pads, harsh detergents, solvents, polish, abrasive or
aerosol cleaners as they may damage the surfaces of the
Product. Dry with a clean, soft cloth before storage, or
reconnecting to the Power Supply.
3. When storing the Product, loosely coil the Power Cord.
Avoid wrapping the Power Cord around the Product. Store
in a cool, dry place.
NEVER
move, carry or hang the
CAUTION:
This Product should not be used or
operated in a confined space. Always use or
operate this Product well away from walls and
curtains. A fire may occur when this Product is in
operation, if it is covered, or is close to flammable
materials, such as curtains, drapes or wall
coverings, etc.
CAUTION:
To reduce the risk of electric shock,
do not immerse
the Product in any liquid, or use
the Product near baths, basins, swimming pool,
shower area or other vessels containing water or
other liquids, or when
standing in or on
damp
or wet surfaces. If any Electrical Product falls into
water,
UNPLUG it immediately; DO NOT REACH
INTO THE WATER. Do not immerse or expose
the Flexible Cord or Plug to rain, moisture or any
liquid. Important:
Prior to reconnecting to the
Power Supply, the Product should be inspected by a
qualified technician.
WARNING:
To avoid becoming entangled in the
Power Cord, do not locate the Product so the Cord
has to be laid through, or along a walkway or
thoroughfare to the Power Outlet.
WARNING:
To avoid overheating the Power
Supply Cord, completely unwind all the cord,
including from the cord storage area of the heater,
if fitted.
CAUTION:
Burns can occur from touching or being
in close proximity with hot metal parts. Avoid
touching hot surfaces, use handles and knobs.
CAUTION: Do not immerse or expose
the
Product, its Flexible Cord or Plug to water or any
other liquid. If any Electrical product falls into
water, or if water should accidentally enter the
Product,
UNPLUG it immediately; DO NOT
REACH INTO THE WATER. Important:
Prior to
reconnecting to the Power Supply, the Product
should be inspected by a qualified technician.
ELEMENT REPLACEMENT
1. Unplug the power cord and remove the heater head, place
on a suitable working surface.
2. Remove the ten screws from the front face, the glass
retention plate and the glass (including the seal).
3.
Carefully unclip the heating element and remove the screw
from each end.
4
.
Attach the new heating element ensuring it is fastened
securely, and clip into place.
5
.
Locate the glass ensuring the seal is in place before
positioning the retention plate and secure with screws.
Содержание EH305
Страница 8: ......