Gasmate EH305, Руководство пользователя, Страница: 5 / 8

Stand Mounting Assembly (Fig 8)
1. Assemble 2 screws (5) and washers (4) through
heater (1) and bent tube (6) and securely tighten
with washers (3) and nuts (2).
2. Assemble lower tube (11) into base (12) and
securely tighten with thumb screw (14) and
washer (13).
3. Place the smaller end of the center tube (10) into
lower tube (11) and securely tighten with
screw (17).
4. Place the smaller end of the top tube (9) into the
center tube and securely tighten with screw (18).
5. Place Collet (8) into top tube, and screw on
(not tightly) Collet nut (7).
6. Slide the bent tube (with the heater attached)
into the Collet and tighten the Collet nut.
7. Using the clips provided attach the cord to the
tubes.
Important: Installation must face the heat direction
to the floor and the power cable must be on the lower
portion of the heater as Fig. 8.
5
6
1
4
3
2
7
8
9
10
11
12
18
17
13
14
8