background image

7

Caution: When the appliance is not in use, the gas  
must be turned off at the cylinder.
Check that the seals between the appliance and 
the gas cylinder are in place and in good condition 
before connecting the gas cylinder.
Do not use this appliance if it has damaged or  
worn seals.
•  Beware of spiders and wasps. Burner tube  
  should be inspected and cleaned periodically.
• 

This appliance must only be serviced by an  

  authorised person.
NOTE: ONLY USE ON A NON-COMBUSTIBLE SURFACE

IMPORTANT

TURNING THE APPLIANCE OFF

If the appliance is no longer to be used and to reduce 
the risk of blocked gas jets caused by excess gas being 
left in the hose, all remaining gas must be expelled from 
the hose assembly.
1. With the flame still operating, turn the valve on the  
  gas cylinder in the clockwise direction until it is off.  
  Allow the flame to burn down then extinguish once all  
  remaining gas in the hose has been used (Pic. 7).
2. Turn the gas controls on the appliance clockwise to  
  the “OFF” position (Pic. 8). 

CARE INSTRUCTIONS

As with all appliances, proper care and maintenance will 
keep them in top operating condition and prolong their 
life. By following these cleaning procedures on a timely 
basis, your appliance will be kept clean and working 
properly with minimum effort
Using warm soapy water with a mild detergent wipe 
down all surfaces and areas of the appliance, taking 
care not to allow water to enter the burner outlets or 
aeration holes located in the burner tube.
DO NOT submerge the appliance in a sink or bowl.
DO NOT use abrasive cleaners or bleach.

MAINTENANCE & SERVICE

During operation if it is noted that the burner flame is 
unstable, is changing colour from blue to yellow or has 
a distinct smell it is important that you contact customer 
service for your local authorised gas appliance repairer 
for inspection. Periodically check the gas control is tight 
and has no leaks, follow the testing for leaks procedure. 
Check the gas connection and regulator for any signs of 
wear or damage, if identified contact customer service 
for a replacement assembly immediately.

PIC. 8

PIC. 6

PIC. 7

PIC. 5

OFF

Содержание CS2112









Отзывы: