CARE INSTRUCTIONS
MAINTENANCE & SERVICE
As with all appliances, proper care and maintenance will
keep them in top operating condition and prolong their
life. By following these cleaning procedures on a timely
basis, your appliance will be kept clean and working
properly with minimum effort.
Using warm soapy water with a mild detergent wipe
down all surfaces and areas of the appliance, taking care
not to allow water to enter the burner outlets or aeration
holes located in the burner tube.
DO NOT
submerge the appliance in a sink or bowl.
DO NOT
use abrasive cleaners or bleach.
SPECIFICATIONS
Model No.
CS2100
Description
High Output Cooker & Pot Set
Gas Type
Propane
ULPG
Injector
1.00mm
0.88mm
Pressure
150kPa
Consumption
90 MJ/h
1786 g/h
78 MJ/h
1547 g/h
Certificate
AGA 8821 G
During operation if it is noted that the burner flame is
unstable, is changing colour from blue to yellow or has
a distinct smell it is important that you contact Sitro
Group for your local authorised gas appliance repairer
for inspection. Periodically check the gas control is tight
and has no leaks, follow the testing for leaks procedure.
Check the gas connection and regulator for any signs of
wear or damage, if identified contact customer service
for a replacement assembly immediately.
For further information or assistance please contact
Customer Service.
For any queries or assistance call
Customer Service
Australia Only
1300 174 876
Hours of operation: Monday to Friday 8.00am - 5.00pm EST
Email: [email protected]
Do not return to place of purchase.
Keep your purchase receipt, this will be required to make any claims under the 12 month warranty.
New Zealand Only
For warranty details visit
www.gasmate.co.nz
For warranty claims return to place of purchase. Your purchase receipt will be required for warranty claims.
