Gasmate ADVENTURER DELUXE 1 Скачать руководство пользователя страница 5

4

5

IF THERE IS A LEAK

•  Turn the cylinder off.
•  Ventilate the area to disperse gas.
•  Check all connections.
•  If leak persists, keep the cylinder upright. 

Keep skin away from any gas or liquid 

escaping from the cylinder.

•  Keep the cylinder at least 20 metres 

away from any sparks or ignition sources, 

including electrical equipment, camera 

flashes, engines and motors.

•  Disperse gas by encouraging maximum 

ventilation and spraying with a fine water 

spray.

IF THERE IS A FIRE

•  If the fire is at the barbecue, turn the gas 

off at the cylinder. Smother the flames 

with a wet cloth, fire blanket or extinguish 

using a fire extinguisher.

•  If the fire is at the cylinder, or you can 

not get to the valve to turn the gas off, 

contact the fire brigade immediately.

•  Using a garden hose, direct the water to 

the middle of the cylinder to keep it cool. 

Try not to extinguish the flame. At least 

if the gas is burning, it won’t be able to 

build up pressure and explode.

Location of your Barbecue

DO NOT use your barbecue in garages, porches, 
sheds, breezeways, or other enclosed areas. 
Your barbecue is to be used OUTDOORS. The 
barbecue is not intended to be installed in or on 
recreational vehicles and/or boats and should 
not be placed under any surface that will burn. 
Do not obstruct the flow of combustion and 
ventilation air around the barbecue housing.

Protect Children

Keep children away from barbecue during 
use and until barbecue has cooled after you 
have finished. Do not allow children to operate 
barbecue.
Always ensure that no sporting or physical 
activities are carried out in close proximity to the 
barbecue during use and while still hot.

Tools You Will Need

Adjustable spanner, Phillips head screwdriver.

Check Barbecue for any Damage

Inspect barbecue parts as you proceed.  
Contact your supplier for assistance regarding 
replacement of any damaged or missing parts. 
Do not assemble or operate a barbecue that 
appears damaged. Barbecues for use with gas 
cylinders are labelled ‘ULPG’. 
This appliance is designed to use a QCC gas 
cylinder.

IT MAY BE HAZARDOUS TO ATTEMPT TO FIT 
OTHER TYPES OF GAS CONTAINERS.

Check labelling at the gas connection on your 
barbecue.

Nominal Hourly Gas Consumption

Main Burner

Gas Type

ULPG

Inj. Size

0.90 mm

Gas Cons.

10 MJ/h

Gas Pressure

2.75 kPa

Содержание ADVENTURER DELUXE 1

















Отзывы: