Cautions
1. The ceramic cooktop must be installed by qualified personnel or techni cians.
We have professionals at your service. Please never conduct the operation by
yourself.
2. The ceramic cooktop shall not be mounted to cooling equipment, dishwashers
and rotary dryers.
3. The ceramic cooktop shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand
heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
6. Do not use a steam cleaner.
Connecting The Cooktop To The Mains Power
Supply
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker. The method of connection is shown below.
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3 mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified
person.
24
Australia:
[email protected]
www.gaslandchef.com
[email protected]
www.gaslandchef.com.au
United States:
Содержание chef CH30BF
Страница 28: ...support gaslandchef com www gaslandchef com...
