
Back Shell
Battery Box
Heat Exchanger
Induction Needle
Gas/Water Valve Assembly
Water Valve
Micro Switch
Drain Plug
Water Inlet Pipe
Cover
Thermostat
Burner
Ignition Pin
Gas Valve
Ignition Device
Solenoid Valve
Gas Inlet Pipe
Water Outlet Pipe
Major Components
Major Technical Parameter
Portable Gas Hot Water Heater
Certification
Model
Gas type
TTP(kPa)
Capacity
Total nominal gas consumption
Injector size
Minimum water pressure
Maximum water pressure
Manufacturer
BE Seires
ULPG
2.75
8L/min
30 MJ/h
0.63mm
15kPa
1000kPa
Junsky
TM
DO NOT REMOVE
GAS SAFETY
CERTIFED
AS 2658 2008
CERT.SAI-400239
Remark:
1. Gas type and rated pressure should be according to the parameter on the
appliance’s body.
2. Above is he standard configuration of a full set of this appliance, the actual
configuration would be different according to different areas.
3. It may be hazardous to attempt to fit other types of gas containers.
20