GASER L-80, Руководство пользователя, Страница: 13 / 18

-13-
9. TROUBLESHOOTING
A list is provided below of the problems that might occur with the machine, their potential causes and
how to solve them.
Problem Cause Solution
The blades do not cut
Springs (Pos. 8 and 9 clamp
assembly) worn out or in poor
condition
Replace affected springs
Clamps in clamp assembly bent
Straighten the blade if possible If
this is not possible, it must be
replaced
A blade has come loose
Replace the affected blade
assembly
Blunt blade
Sharpen the blade (a special
diamond file is required)
Crank hard to turn
The spindle (Pos. 15 overview)
is not well lubricated Lubricate with oil suitable for
food-grade use
The surface of the eccentrics is
not smooth.
Replace the eccentric
The rollers do not turn
1. If they are still round, lubricate
with oil suitable for food use
2. If they are not still round,
replace the effected rollers and
lubricate with oil suitable for
food-grade use
Interior crank bearing (Pos. 4
overview) in poor condition
Replace bearing