background image

GENERAL INFORMATION

Clearances

Hose & Regulator Safety

Never Store your Gas Cylinder Indoors

Gas Installation Code

 

 

This BBQ is to be used with LPG only. 
 

Failure to comply with these instructions could 
result in a fire or explosion which could cause 
serious bodily injury, death or property damage. 

Accessible parts may be very hot. 

Keep young children away. 

Any modifications of this barbecue may be 
dangerous. 

Do not move this barbecue during use. 

Turn off gas supply at the cylinder after use. 

Read instructions before using the barbecue. 

Parts sealed by the manufacturer or their agent 
must not be manipulated by the user. This barbecue 
is only to be used and stored outdoors. 

 

Minimum Clearances from combustible materials must 
be:Rear-600mm,Sides-600mm,Above-600mm. 

The regulator and hose assembly supplied with the barbecue 
is suitable for LPG only. 

A gas regulator adjusted to have an outlet pressure of 
2.75kPA is supplied for connection to the LPG cylinder. The 
pressure regulator and hose assembly supplied with the 
barbecue must be used. Replacement pressure regulators 
and hose assemblies must be those specified by the 
barbecue manufacturer. 

 

Never operate this barbecue without a regulator 

 

When connecting the hose and regulator assembly to the gas 
cylinder take care to avoid unnecessary twisting or kinking of 
the flexible hose. 

After the assembly has been secured, turn on the gas and 
check for leaks by brushing a soap and water solution over all 
connections. 

 

Do not test for gas leaks with an open flame 

 

If you are unable to correct the leak by tightening the 
connections, turn off the gas and contact the supplier 
immediately. 

Always ensure the barbecue is kept away from flammable 
materials and the gas cylinder clear of any heat source. When 
changing over from an empty gas cylinder to a full one make 
sure this procedure is carried out in a flame free atmosphere. 

 

If this information is not followed exactly a fire 
causing death or serious injury may occur. Do not 
store a spare gas cylinder under or near this 
barbecue. Never fill the cylinder beyond 85% full. 

This barbecue is only to be used and stored

outdoors.

 

 

   

 

 

  

 

Specifications

Gas Cylinder Use & Safety

 

 
Barbecue specifications can be found on the data label 
attached to the barbecue body.

 

If you smell gas 

1.

Shut off gas to the barbecue at its source, if 
possible. 

2.

Extinguish any open flame. 

3.

Open hood. 

4.

If odour continues immediately call your gas 
supplier or fire department. 

 

This is a low pressure barbecue and must only be used with 
the hose and regulator supplied. Your barbecue is designed 
for use with 9Kg LPG cylinders. 

 

Do not connect your barbecue to a gas cylinder 
exceeding this capacity. 

Never connect an unregulated gas cylinder to your 
barbecue. 

 
The cylinder should be filled by a reputable gas supplier and 
visually inspected and re-qualified at each filling. 

Always keep cylinder in an upright position. Always close the 
cylinder valve when the barbecue is not in use. 

Do not subject the cylinder to excessive heat. 

If you store your barbecue indoors, ALWAYS disconnect the 
cylinder first and store it safely outside. Cylinders must be 
stored outdoors in a well ventilated area out of reach of  

children, and must not be stored in a building, garage or any 
other enclosed area. 

Read carefully before assembling and operating 
your barbecue. 

Содержание G2082

















Отзывы: