![background image](http://html1.mh-extra.com/html/gasboy/islander-prime/islander-prime_instruction-and-installation-manual_3666678094.webp)
Maintenance
7.4 Printer
Page 82
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
7.4 Printer
Due to the harsh environment of the homebase station, the printer should be cleaned
periodically.
Note: Clean the printer front panel with a damp cloth only. DO NOT use any solvents such as
thinner or benzene to clean the printer front panel.
The following describes the cleaning procedures for the thermal printer head in the printer.
The cleaning is performed with the printer cleaning card. The printer cleaning card is provided
in a protective package to prevent dryness.
The cleaning procedure shall be performed whenever ink is faded on a receipt.
Note: The cleaning procedure must be done quickly as the substance in the cleaning card
evaporates over a short period of time.
To clean the thermal printer head, proceed as follows:
1
Turn on the printer.
2
Insert paper in the printer slot, and make sure that the printer guillotine cuts the paper
protruding from the printer.
Note: This procedure ensures that the guillotine will not cut the cleaning card.
3
Press the green paper-lock lever and pull out the paper from the printer (see
Figure 70: Paper Lock Lever
4
Remove the cleaning card from its packaging.
5
Insert the cleaning card manually into the printer paper slot.
6
Press the green paper-lock lever back to its initial position.
Содержание Islander Prime
Страница 4: ...This page is intentionally left blank...