Gasboy Islander PLUS, Руководство по установке

Страница: 46 / 146

2-4.4. Required Conduits in Island
The types of conduits in the Island are a function of the different equipment, and their location in
the Island. Basically, there are two functional conduits:
•
High voltage conduits
•
Low voltage conduits
The following conduits are required in the Island:
• High voltage conduits
o
AC power for Islander PLUS
o
Pump control from pumps to Islander PLUS
o
Pump In-use signal from pumps to Islander PLUS
•
Low voltage conduits
o
Internet line from LAN at Office to Islander PLUS
o
RS-232 communication line from TLG at office to Islander PLUS
o
RS-485/422/C.L. or Tokheim
o
Pulser from pumps to Islander PLUS
• Grounding
o
At least 10 mm (OOO AWG) Grounding cable to pump chassis
o
At least 10 mm (OOO AWG) Grounding cable to Islander PLUS pole
(Connected to the external chassis grounding post)
o
Grounding cable to TLG – in accordance with TLG manufacturer
instructions.
• Tank conduit
o TLG probe
2-4.5. Required Conduits in Islander PLUS
Four conduits can be inserted in the Islander PLUS, each carrying specific wires, as listed in
Table 2-1 and shown in Figure 2-4.
Table 2-1. Conduits into Islander PLUS
No. Conduit Type Type
1 Low voltage Pulser, TLG, LAN
2 High voltage AC power, GND , In-use
3 High voltage Control
Islander PLUS Manual
32