Gasboy C08951, Руководство по обслуживанию

Страница: 8 / 16

03/20/03 2-1
Section 2
SWITCHES AND SETTINGS
PRINTER STATUS BOARD
The printer status board (Figure 2-1) is attached to the
inside of the printer access door (See Figure 1-1) This
location provides the site attendant easy access to the
switches and indicator lamps needed to perform paper
loading, self-tests, and simple troubleshooting.
Figure 2-1. Printer Status Board
STATUS BOARD SWITCHES
Table 2-1 summarizes switches and results for the printer status board.
Table 2-1. Status Board Switches
Switch Function
SW2 SELF-TEST
Switching SW2 to the left starts a self-test of the printer. It will print a barber-pole pattern
of all the characters that may be printed on a receipt.
Switching SW2 to the right stops the printing and cuts the paper.
A short self-test should be performed whenever the paper or ribbon is changed.
SW3 PAPER FEED
Pressing SW3 causes a continuous paper feed. This is used while loading new paper.
SW4 ON LINE
Pushing this switch alternately puts the printer in the online or offline mode. The
printer must always be online (green lamp on) to print receipts or do a self-test.