Gasboy C08951, Руководство по обслуживанию

Страница: 15 / 16

GASBOY Star Receipt Printer
3-6 03/20/03
3. Loosen the hex adjusting screw (located on the lower left side of the cutter) using a 2.5 mm
hex key. Do not use pliers as damage to the screw head may result. Pivot the bottom cutter
blade down. Tighten the hex screw to lock the blade in place.
4.
Perform a few self-tests to make sure the cutter operates properly.
5.
Return the printer slide assembly to its normal position and lock it in place with the hex head
screw.
6.
Close and lock the printer access door.
NOTE: Make sure the printer door lock is drawn tight in order to insure a watertight seal.