N
2
-Generator
– User Manual
18 / 31
5.4 Installation and operation requirements
INFORMATION!
•
The nitrogen generator should be positioned on a flat surface that
is not exposed to vibrations and able to withstand a weight
greater than 50 kg
WARNING!
•
Do not position the generator near flames or other heat sources
•
Always leave sufficient clearance for the circulation of air around
the appliance (about 10 cm), above all at the rear (about 20 cm),
where the ventilation air intake is located (as shown in the picture
below).
•
Do not use the generator in a sealed environment or without
suitable ventilation
•
Do not use the appliance in temperature and humidity conditions
outside of the limits specified for operation
DANGER
•
Make sure that the characteristics of the mains power supply are
adequate for the power ratings indicated in the table of technical
specifications
•
Power to the appliance must be turned on only after installation
