GAS MAD A1, Руководство пользователя

Страница: 23 / 28

22
HOW TO
BASS EQ
If everything is tuned correctly and the level/gain has been set, the BASS EQ should remain
in default (0dB). This function will apply level/gain at 45Hz centre frequency. Be adviced
that equing the bass from 0-12 dB is a lot, an increase of +3dB doubles the output! If used
incorrectly, this can permanently damage your subwoofer.
WARNING! The information below is for experienced users and bass addicts only, if you are
new to the wonderful world of low frequencies, leave the BASS EQ in default mode or
consult with your local GAS AUDIO POWER dealer.
If you use the BASS EQ, make sure to turn down your level/gain first (to 0) before you start
adjusting it. Start a music track and very carefully turn the EQ dial up until you start hearing
distortion, then follow the HOW TO chapter about level/gain to optimize your system.
Incorrect usage of the BASS EQ can permanently damage your subwoofers.
Example: A1-
70.2