manualshive.com logo in svg

GAS GAS WILD HP 300 - SERVICE, Руководство по обслуживанию

Поделиться
Скачать
GAS GAS WILD HP 300 - SERVICE Скачать руководство пользователя страница 59

WILD HP -

127

-

TROUBLE

CAUSE

REMEDY

Engine operate unevenly

Engine does not rev high, will
not reach full power

Abnormal engine noise

Spark Knock

Exhaust pipe get out white
smoke

Exhaust pipe get out brown
smoke

Clutch not disengaging properly

- Spark plug dirty, or maladjusted.
- Spark plug cap or high tension wiring
trouble.
- Wiring shorted or open.
- Water in fuel.

- Fuel supply partically interrupted or
carburettor dirty.
- Dirty air filter.
- Hose of engine ventilation is bent.

- Main jet clogged.
- Crankshaft bearing worn or damaged.
- Clutch slipping.

- Starter problem.
- Overheating.

- Carbon in combustion chamber.
- Incorrect or poor fuel.
- Incorret or damaged spark plug.
- Connecting rod exhaust system damage.

- Cylinder head gasket leaking.

- Gas valve passage maladjuste.

- Air filter is bloked.
- Main jet higher.

- No clutch lever play maladjusted.

- Check spark plug, clean, adjust or replace.
- Check spark plug cap, if it's damaged, change it.

- Go to specialized garage.
- Empty fuel tank and fill it up with new one.

- Clean and check fuel system as well as carburettor. Go
to specialized garage.
- Clean and lubricate it. If it's necessary change the air filter.
- Check it, if it's damaged, you will replace non-buckling
ventilation hose.
- Go to specialized garage.
- Go to specialized garage.
- Check it. Go to specialized garage.

- Go to specialized garage.
- Look number 3.

- Go to specialized garage.
- Empty, and fill up with good fuel.
- Change spark plug with new good one.
- Check if the exhaurt system is damaged. Connecting rods
have to be perfect, if they aren't, change them.

- Change cylinder head gasket leaking. Go to specialized
garage.
- Adjust gas valve passage. Go to specialized garage.

- Clean or change the air filter. Go to specialized garage.
- Check main jet and verify.

- Go to specialized garage.

4

5

6

7

8

9

10

Содержание WILD HP 300 - SERVICE


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды