GAS GAS F0001U1, Руководство пользователя

Страница: 44 / 104

13 SERVICE WORK ON THE CHASSIS
42
13.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401942-01
–
Raise the motorcycle at the frame underneath the engine.
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
13.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
402581-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
1
into the plug-in
stand bracket on the left side of the vehicle.
Info
Remove the plug-in stand before riding.
13.3 Bleeding the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 42)
F02179-10
Main work
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 42)