GAS GAS EC 350F Скачать руководство пользователя страница 103

Страница: 103 / 150

ELECTRICAL SYSTEM 15

101

Warning

Fire hazard

Incorrect fuses overload the electrical system.

–

Only use fuses with the required ampere value.

–

Do not bypass or repair fuses.

–

Insert the spare fuse with the correct rating.

Fuse (75011088010) (

p. 132)

Fuse (75011088005) (

p. 132)

Tip

Put a spare fuse in the fuse box so that it is available if
needed.

–

Check the function of the electrical power consumer.

–

Close the fuse box cover.

Finishing work

–

Mount the seat. (

p. 60)

15.6

Removing the headlight mask with the headlight

F03247-10

–

Detach the brake line and wiring harness from the headlight mask.

–

Loosen rubber straps

. Slide the headlight mask up and swing it

forward.

F03248-10

–

Detach plug-in connectors

and take off the headlight mask with

the headlight.

15.7

Installing the headlight mask with the headlight

F03248-11

Main work

–

Join plug-in connectors

Содержание EC 350F























































































































































Результаты поиска

Содержание EC 350F

Отзывы:

GAS GAS EC 350F, Руководство пользователя, Страница: 103 / 150

Результаты поиска

Содержание EC 350F

Отзывы: