GAS GAS EC 2T 20012501300cc RACING, Руководство пользователя

Страница: 68 / 107

Owner’s manual
-68-
Maintenance
3
Transmission oil change
The transmission oil should be changed periodically to ensure engine life.
1. Heat the engine for 5 minutes, in order to lift all sediments.
2. Stop the engine and put a container under the motorcycle.
3. Remove the emptying screw (see “Checking the oil level”) and put the bike
in the use position to allow the complete oil drain.
4. Remove the filler plug to ensure a better draining.
5. Clean perfectly the drain plug magnet.
6. Tighten the oil emptying screw with its o ring, at 20 Nm.
7. Take off the filling plug (see “Checking the oil level”) and put new trans-
mission oil.
8. Check the oil level, after powering the kick-starter for 3 or 4 times.
9. Screw the oil filling plug.
8.-PISTON AND RING
For this check, adjustment, or change, you must go to your GAS GAS official
service.
9.-CYLINDER HEAD, CYLINDER, EX. VALVE
For this check, adjustment, or change, you must go to your GAS GAS official
service.
3 1 2
10.-EXHAUST SYSTEM
Exhaust and muffler reduces noise and lead gases away from the rider.
If the exhaust is damaged oxidized, beaten, or cracking, change it to a new one.
Change the silencer fiber if the noise is becoming too high or the engine perfor-
mance decreases.
Exhaust cleaning
For the cleaning of the exhaust pipe you must go to your GAS GAS official ser-
vice.
Muffler change
1. Remove the bolt (1) of the left fairing.
2. Remove the bolt (2) of the muffler (3) and take out by pulling backwards.
3. Disengage the muffler (arrow) .
4. Change the muffler and reassembly all parts.