GAS GAS 2009 EC 200 2T, Руководство пользователя

Страница: 52 / 107

Owner’s manual
-52-
Starting procedure
To start your GAS GAS with the kickstarter follow this steps:
1. Open the fuel tap.
2. Deploy the kickstarter.
3. Give the throttle two energic strokes.
4. Pull the choke lever (1).
5. Push the kickstarter vigorously.
NOTE: With the motor at the operating temperature it will not be necessary to
pull the choke lever.
1
To start your GAS GAS by electric start follow this steps:
1. Open the fuel tap.
2. Turn on the key (2).
3. Give the throttle two energic strokes.
4. Pull the choke lever (1).
5. Pull the clutch lever.
6. Push the kickstarter vigorously.
NOTE: With the motor at the operating temperature it will not be necessary to
2
pull the choke lever.
Break-in procedure
It is important to respect the break-in procedure, with this you will ensure the
duration and correct function of your GAS GAS in the long term. Intervals to res-
pect are as follows:
1. From 0 to 200 Km.: Ride between 50% and 75% of load (throttle opening),
alternatively, without continued use of the 75% load.
2. From 200 a 300 Km.: Ride equal but occasionally reaching the 100% load,
without keeping it more than 5~10 seconds.
3. From 300 a 400 Km.: Ride between 75% and 100% of load alternatively,
without keeping the full load.
4. From 400 Km, increase demand with progressivity for about 60~80 Km, to
reach its full performance.
DANGER
An imprudent acceleration can cause engine problems. Be careful to use the
skills and techniques necessary when driving the bike.