GAS GAS 2009 EC 200 2T, Руководство пользователя

Страница: 47 / 107

Owner’s manual
-47-
Configuration
SET HIGH TEMPERATURE WARNING
When programmed engine temperature is reached, the amber warning led will
turn on. The warning will be disabled if the value is 0.
Change the blinking digit with the left button.
Change to next digit using the button
To confirm press the button
NOTE: engine temperature sensor is optional and is not available in GAS GAS .
SET DANGER TEMPERATURE WARNING
When programmed engine temperature is reached, the red warning led will turn
on. The warning will be disabled if the value is 0.
Change the blinking digit with the left button.
Change to next digit using the button
To confirm press the button
SET OIL REMINDER
When programmed kilometers or miles are reacher, the oil change reminder
icon will turn on.
Change the blinking digit with the left button.
Change to next digit using the button
To confirm press the button
SET MAINTENANCE REMINDER
When programmed kilometers or miles are reacher, the maintenance reminder
icon will turn on.
Change the blinking digit with the left button.
Change to next digit using the button
To confirm and go back to normal mode, press the button
NOTE: the oil and maintenance reminders must be manually reset by entering
them again in the configuration mode.
Measure of the wheel circumference
Diameter (mm)
METHOD 1
Measure the diameter of the front wheel in millimeters. Multiply the diameter
by 3.14 and you will get the measure of the wheel circumference.
METHOD 2
Find a totally flat surface. Make a mark on the flank of the tire and the ground.
Advance with the motorcycle until the wheel complete one revolution. Make a
mark on the ground at this point. Measure the distance between the marks of the
ground and convert to millimeters. Use this number as a measure of the wheel cir-
cumference. For greater precision, the driver or an equivalent weight must remain
at the motorcycle during this process.