GAS GAS 125 TXT GP 2019, Руководство пользователя

Страница: 26 / 51

Owner's Manual
-26-
Removing the carburettor
Remove and regularly clean the main jet after washing and clean the inside of
the carburettor float chamber.
The reed block assembly only consists of a body, reeds and stops. To examine
this assembly, remove it by unscrewing the 4 screws that hold it to the back of the
left and right-hand crankcases.
Since it is the last access door to the inside of the cylinder, take special care to
keep it in good condition and regularly check its properties. Take care to cover the
cylinder inlet with a clean cloth to prevent foreign objects from entering the com
-
partment when the components are handled.
The distance between the reed and the stop must be 3.3 mm on each side of the
reed valve, in all displacements. The sheets must be in perfect condition. They can
not have notches, scratches or bent and / or broken parts. If so, you must proceed
to change the set for a new one.
Removing the reed block