Gas Data GFM400 Series, Руководство пользователя

Страница: 36 / 38

G F M 4 0 0 S E R I E S U S E R M A N U A L
2) After cleaning the probe, rub it dry externally with a clean, dry, fluff-free cloth.
3) Leave the top part of the impeller to dry for ca. 30 minutes.
Only clean the head of the impeller!
Probes are on no account to be fully immersed in the solution.
Cable, extension rod, case
The following agents:
-Soapy water
-EDP plastic cleaner
-Window cleaning fluid (without ammonia) -and for any stubborn deposits,
pure benzene
These solutions are only to be applied to the parts with a fluff-free cloth.
Only carry out surface cleaning! The parts are never to be immersed in the
solution!
Snap Head
The snap head fixing system renders it very simple to fit a new impeller to the flow
probe: this saves costly non-productive time and in the event of damage to the
snap-head enables you to have the probe back in service in a matter of seconds by
simply changing the snap-head.
Checking/factory inspections
Depending on the application and the loads on the instrument we consider it highly
advisable to have the instrument respectively the probe annually checked or
inspected / repaired at our factory.
GFM400 Series 32 GFM400 Series User Manual