Garz & Fricke CUPID 5.7 basic, Руководство пользователя

Страница: 9 / 28

CUPID SERIES
· Manual
3.6 Internal battery
The internal baseboard is equipped with a Lithium battery (CMOS battery, type CR2032), which has a typical
lifetime longer than 10 years.
Danger of explosion when replaced with wrong type of battery.
Replace the battery only with a Lithium battery that has the same or equivalent type recommended
by Garz & Fricke GmbH.
Do not dispose of used CMOS batteries in domestic waste.
Dispose of the battery according to the local regulations dealing with the disposal of these special
materials (e. g. to the collecting points for disposal of batteries).
3.6.1 Replacement of the internal battery
The internal battery is placed as per figure below.
For replacement, the SD-card and the back cover have to be removed.
The device shall be opened by authorized and skilled personnel only.
Danger of electric hazard! First before opening, please make sure that the unit is completely
disconnected from any power supply, direct or indirect. In order to remove the back cover all other
connectors must be removed as well. Please make sure that the SD-card has been removed as it
blocks the cover. Furthermore take care about the socket and connectors. Especially the micro-USB
connector might be damaged easily.
Position of the battery
4 screws of back cover
Please remove SD card first!
9