Garz & Fricke CUPID 5.7 basic, Руководство пользователя

Страница: 7 / 28

CUPID SERIES
· Manual
7
3.3 Technical data (options are greyed out)
CPU
Type Freescale ARM1136JF-S
TM
i.MX35
Clock/Frequency 532 MHz
Specifications 32 bit with MMU
16 KB L1 I-Cache and D-Cache
128 KB L2 Cache
Memory
ROM 256 MB NAND-Flash
RAM 128 MB DDR-SDRAM / 512 KB SRAM
Storage Card Slot 4 bit MMC/SDIO/SD/SDHC up to 4 GB
Graphics
Controller Programmable LCD controller
Resolution Up to 800 x 600 pixel
Colours 16 bit (65,536 colours)
Supported Orientation Horizontal/vertical
LCD Display and Resistive Touch
1
Size (inch / mm) 5.7 / 144 7.0 / 178
Width x Height (pixels) 640 x 480 (VGA) 800 x 480 (WVGA)
Colours 262,144
Backlight Unit
LED
Luminance 400 cd/m²
Active Area W x H (mm) 115.2 x 86.4 152.4 x 91.44
Viewing Direction 12 o’clock
Viewing Angle (Typ.) 100° (V) / 140° (H) 120° (V) / 140° (H)
Lifetime Backlight 20,000 h 30,000 h
Touch 1,000,000 (finger) touches
Surface Properties Anti-glare
Hardness 3H
Touch Technology Standard 4 wire resistive analogue
PCT Option Type Single Touch
Transmissivity ≥ 90 %
Controller position On FPC
Interface Internal I²C
Interfaces
Network 1x 10/100 Mbit/s Ethernet (RJ45)
Audio 16-bit 48 kHz, 1x1 Watt RMS (8 Ω )
Serial Interfaces 2x RS-232 (RX/TX/CTS/RTS)
1x RS-485, galv. isolated together with CAN
MDB Option 1x MDB instead of 2
nd
RS-232
USB 2.0 1x 12 Mbit/s Full-Speed Host (Type A)
1x 480 Mbit/s High-Speed OTG (Type Micro-AB)
Max. output 500 mA
CAN Fieldbus 1x CAN (ISO/DIS 119898), galv. isolated together with RS-485
CAN2 Option 2nd CAN instead of RS-485
Keypad/SPI/I²C Standard
Multiplex mode 1
Multiplex mode 2
Multiplex mode 3 1x 8x8
1x 5x5 Keypad, 1x SPI
1x 7x7 Keypad, 1x I²C
1x 4x4 Keypad, 1x I²C, 1x SPI
Speaker Speaker Option 1x 300 mW (max. 600 mW) RMS (8 Ω )
on internal connector X9
Power Supply and Consumption
Supply Nom. 12/24 V DC or PoE (Power over Ethernet)
Consumption t.b.d. t.b.d.
t.b.d. t.b.d.
t.b.d. t.b.d.
Internal Backup Battery
(RTC)
Type 3 V Li-Ion Type CR2032
Lifetime >10 years, depending on application
1
Display specification may vary due to customization. For further questions, please contact technical support.