Garwoods Domino EC-7 Series, Инструкция по установке и эксплуатации

Страница: 4 / 39

3
2
、
Installation Guideline
★
Installation should be followed below requirements
：
1. The walls on top of the working face and next to the installation of electric cooker must
be heat-proof.
2. The laminated boards and adhesive used for installation must be heat-resistant.
3. For any installation method, the air under the electric cooker and behind the cooking
range should have enough space for cooling in order to ensure the safety of operating the
electric cooker.
4. Based on the prescribed dimensions, a square hole is opened on the work table. Ensure
the distance between any side of the work table and the walls is
55mm.
5. Protect the opening: If in contact with damp, the laminated boards used in marking the
work table will easily expand more. It is required to stick varnish or special adhesive onto
the edge of the opening in order to prevent any steam from condensation under the work
table.
6. For any condition of installation, the electric cooker should have a good ventilation
condition with air inlet and air outlet not blocked.
7. Don’t place other equipments on the working face of the cooking zone of the electric
cooker and within the range of 30cm around the working face.
8. If choosing a table-top installation, ventilation hole shall be at least 55mm from wall
surface.
9. The electric cooker must be complied with a 13A power outlet.
★
Steps on Installation
：
~ Open an installation hole on the worktop of cabinet as per illustration 1 .
(Note : The height shall be more than 100mm)
Cut out dimensions(unit/mm)
(W) 275 x (D) 495 x (H) 100
illustration 1