Garwoods Domino EC-7 Series, Инструкция по установке и эксплуатации

Страница: 11 / 39

10
4
、
Operation Method
4.1
、
Operation Instructions
：
Power Connection After power connection, buzzer will make a short sound and the LED
digit will show “ ” . That means the electric cooker keeps at the stand-by mode. If no
working of the electric cooker after 15 sec., the electric cooker will automatically be
locked and entering sleeping mode.
Sleeping Mode If no working of the electric cooker after 15 sec. when power connection
or surface of the electric cooker has been thoroughly cool down after cooking, the electric
cooker will automatically enter sleeping mode for energy saving. If resume and re-start
the working of the electric cooker, just touch any keys on the control panel, then press
the “ON/OFF” key.
Lock Function When lock indicator is on , that means the lock function is active. At this
time, all keys will be locked except ON/OFF key and Lock key in order to avoid
mis-operation. If resume the lock function, by pressing Lock key, buzzer will make a
short sound and the lock indicator will be off. If start again the lock function, by
pressing the
Lock key, buzzer will make a short sound and lock indicator will be on.
On switching
Place cookware on heating zone (Pls. refer to
Usable and Non-usable
Cookware
), by pressing the “ON/OFF” key, then by pressing “Power Plus” key, LED will
show the pre-set power level.
Power Level Alteration At the power function, by pressing “Power plus” Or “Power
minus” key to increase or decrease power level. LED digit shows the set power level. To
stop the power output, by pressing “Power minus” key to decrease the power level to
“
” two-zone electric cooker should decrease the power level to “ ” at the same time.
After 15 sec. , the electric cooker will be automatically locked and power off or by
pressing “ON/OFF” key to power off the cooker directly.
(
Notice
: The surface on the Infrared cooker or infrared cooking zone is under a very high
temperature condition after cooking, therefore, when you decrease the power level to
“
”, the LED digit will show “H” instead of “ ”. That means that the cooker is under
cooling down (Pls. refer to below high temperature indicator).
Induction cooker or induction cooking zone with high power consumption offers a
booster function. By pressing “Booster Power” key, the cooking zone may be used to
shorten heating-up times and the LED digit will show “P”. The booster works for max 5
min and the cooking zone will return to previous power level when the work time of
booster power is reached.